Pro AV Catalog
Electronic Theatre Controls Inc. - Prodigy P2
Request Quote
All Products

650lbs 1.2G General Purpose Low Profile Hoist

Model: Prodigy P2

  • Unique prodigy hybrid drum powerhead manages up to eight lift lines with 50’ (15m) of travel in a machine 1/3 the size of other hoists
  • Uses 3/16” (5mm) wire rope to accomodate 420lbs (190kg) working load limit (WLL) per lift line with a 10:1 design factor and up to 650lbs (300kg) total lifting capacity
  • Lightweight and small-sized powerhead, 300lbs (135kg) 45.5” x 13.5” x 15.5” (116cm x 35cm x 39cm)
  • Limit switches and encoders: four rotary limit switches with visual setting indicators for more effi cient installation
  • Multiple mounting orientations: can be installed upright, underhung or vertically and utilize traditional upright or underhung head blocks and loft blocks
Compare
Project List
Product Info
Tech Specs
Documents
The Prodigy P75 is Low Profile General Purpose Hoists provide a simple, way to lift scenery or curtains for storage or for production. With the smallest space requirement in the industry, the P2 hoist is especially useful where an extremely low profile allows the hoist to disappear in the plenum. Medium-sized schools and other facilities can be equipped for movable scenery and drapes with the safety of motorized hoisting systems. These hoists resolve space and access challenges for schools, nightclubs, houses of worship or other places where there is no means to access scenery or drapes overhead. With motorized hoists, it will not be necessary to climb ladders or scaffolds to install or remove scenery or drapes. Instead, the motorized battens can be lowered to working level, allowing workers to easily install and service equipment that can be raised to performance or storage positions high above the stage floor.
  • Unique prodigy hybrid drum powerhead manages up to eight lift lines with 50’ (15m) of travel in a machine 1/3 the size of other hoists
  • Uses 3/16” (5mm) wire rope to accomodate 420lbs (190kg) working load limit (WLL) per lift line with a 10:1 design factor and up to 650lbs (300kg) total lifting capacity
  • Lightweight and small-sized powerhead, 300lbs (135kg) 45.5” x 13.5” x 15.5” (116cm x 35cm x 39cm)
  • Limit switches and encoders: four rotary limit switches with visual setting indicators for more effi cient installation
  • Multiple mounting orientations: can be installed upright, underhung or vertically and utilize traditional upright or underhung head blocks and loft blocks
  • Optional Compression Tube technology: channel snaps in place to interface with facility structure and neutralize additional lateral forces on the building
  • Load Profiling,a user-recordable dynamic function to detect over/under loading during travel
  • Slack line detection, a slack lifting line will stop the hoist from downward travel
  • Right Angle Cable Adjuster (RACA)permitting rapid trim adjustment, even under load, the unique trim clamp saves up to 14” (36 cm) of building height and allows greater batten travel
  • Built to ANSI/PLASA motorized hoist standard E1.6-1
 
Request Quote
 

Suggested Products