Single 80mm Cooling Fan Kit for 19" thru 43" Enclosures (not for PRO)

Protective Enclosures recommends this fan system with integrated filter and 115V direct wall plug for any unit that is placed in direct sun or in hot environments.

Fan power cord has a built-in thermostatic control which turns on at 88 degrees and off at 78 degrees to ensure that your enclosure stays at the proper temperature.

This Fan Kit can be installed by customer if ordering after initial purchase of enclosure.

Included in Package

(1) 115V AC Fan 80x80x25

(1) 80mm Fan Filter Kit

(1) 48in Power Cord

115V AC Fan 80mm x 25mm HS

The high speed 80 by 80 by 25 millimeter 115V AC cooling fan has terminal connectors and can run on 100 to 125 voltages. The fan contains long life dual ball bearings rated at 67,000 hours and can be mounted in any direction. Its housing is constructed of die-cast aluminum and blades molded of thermoplastic. Features impendence protection and is approved by CE, UL, and RoHS.

80mm Fan Filter Kit

The fan filter kit consists of three pieces: a guard, a filter, and a retainer. The guard has four holes which can be screwed onto any cooling fan with an 80 millimeter square frame. The retainer can be easily clipped on and off the guard to reach the filter piece for cleaning.

48in Fan Power Plug Cord

The fan cord features a two-hole fan connector head that can be attached onto any AC fan that has terminal connectors. On the opposing end is a NEMA power plug head. The total length of the cord is 4 feet long.